1. SHARPENING CASSETTE POSITIONS
Squeeze and hold sharpening cassette rotation lever and rotate the cassette up,
clockwise to the SHARPEN or GRIND position.
PARKED*
REMOVING THE SHARPENING CASSETTE FOR ATTACHMENTS:
•
Remove belt from sharpening cassette (See PG 13 for details)
•
Push and hold lock lever and rotate cassette to position show.
•
Dismount cassette by pulling outward.
•
Locate this same position to re-install sharpening cassette or attachments.
SHARPEN
*
Warning!
Do not energize tool while in the
•
parked position. Keep fingers, hands, and body
clear of the belt. Failure to follow these warnings
could result in severe injury or death.
** For grinding applications, remove the Angle Guide
by pulling straight up and off. Rotate the edge guide
to the vertical position for grinding applications.
1 1
|
G E T T I N G T O K N O W Y O U R K E N O N I O N S H A R P E N E R
45°
45°
GRIND**
POP!
Need help?
Do you have a question about the KEN ONION EDITION KNIFE & TOOL SHARPENER MK.2 and is the answer not in the manual?