Product Overview; Overview Of The Skp 100 G3 Plug-On Transmitter; Overview Of The Displays - Sennheiser ew 100 G3 Series Instruction Manual

All manuals and user guides at all-guides.com

Product overview

Overview of the SKP 100 G3 plug-on transmitter

Microphone input, XLR-3 socket
(female, unbalanced)
Mechanical locking ring of
XLR-3 socket
Infra-red interface
Display panel, backlit in orange
UP button ( )
DOWN button ( )

Overview of the displays

After switch-on, the plug-on transmitter displays the "Frequency/Name"
standard display. For further illustrations and examples of the different
standard displays, refer to page 9. The display backlighting is
automatically reduced after approx. 20 seconds.
533.875
ew100 G3
P
MUTE
AF
Display Meaning
Audio level "AF" Modulation of the plug-on transmitter with
peak hold function.
Frequency Current transmission frequency
Name Freely selectable name of the transmitter
Transmission icon RF signal is being transmitted
Lock mode icon Lock mode is activated
"P" (pilot tone) Pilot tone transmission is activated
"MUTE" Microphone input is muted
Battery status Charge status:
Product overview
»
Operation and battery status
indicator, red LED
lit = ON
flashing = LOW BATTERY
ON/OFF button
with ESC function (cancel)
MUTE switch
SET button
Battery compartment cover
MHz
approx. 100%
approx. 70%
approx. 30%
charge status is critical, the red
LOW BATTERY LED is flashing:
5