Product Overview; Overview Of The Sk 300 G3 Bodypack Transmitter; Overview Of The Displays - Sennheiser SK 300 Instruction Manual

Product overview

Product overview
Overview of the SK 300 G3 bodypack
transmitter
³ ·
¶
¹
³
Microphone/instrument input (MIC/LINE),
3.5 mm jack socket, lockable
· MUTE
switch
»
Socket for connection of RMS 1 external mute switch,
2.5 mm jack socket
¿
Antenna
´
Operation and battery status indicator, red LED
(lit = ON/flashing = LOW
²
Audio overmodulation indicator, yellow LED
(lit = AF PEAK)
¶
Charging contacts
º SET
button
¾
UP/DOWN button /
µ
Battery compartment
¸
Battery compartment cover
¹
Battery compartment catches
Infra-red interface
ON/OFF button
with ESC function (cancel)
Display panel, backlit in orange
6
¿
»
´
²
¶
º
¾
µ
¸
¹
BATTERY)

Overview of the displays

After switch-on, the bodypack transmitter displays the
standard display "Frequency/Name". For further illustra-
tions and examples of the different standard displays, refer
to page 16.
The display backlighting is automatically reduced after
approx. 20 seconds.
531.375
ew300 G3
P
MUTE
AF
Display Meaning
Audio level "AF" Modulation of the bodypack
transmitter with peak hold
function
When the transmitter's audio
input level is excessively high, the
"AF" display shows full deflection
and, in addition, the yellow
AF PEAK
Frequency Current transmission frequency
Name Freely selectable name of the
transmitter
Transmission icon RF signal is being transmitted
Lock mode icon Lock mode is activated
"P" (pilot tone) Pilot tone transmission is
activated
"MUTE" Audio signal is muted/
RF signal is deactivated
Battery status Charge status:
Product overview
MHz
²
LED lights up:
²
approx. 100%
approx. 70%
approx. 30%
charge status is
critical, the red
´
LOW BATTERY LED
is flashing:
´
7