Configuration; Connecting Possibilities (Can@Net Nt With Pc) - HMS Networks Ixxat CAN@net NT 100 User Manual

CAN@net NT 100/200/420

6. Configuration

IMPORTANT
The security settings set via the CAN-Gateway Configurator define if changing the configuration via
Ethernet is possible and if a password is needed to change to configuration. The default password is
IXXAT. For more information see user manual CAN-Gateway Configurator.

6.1. Connecting Possibilities (CAN@net NT with PC)

IMPORTANT
Connection disturbance possible if extension cable or longer cable is used!
HMS recommends connecting the interface directly with the included cable or via an active USB hub
to the computer according to the USB specification.
There are different possibilities to connect the CAN@net NT with the PC. Depending on the type of connection
different ways of configuring the IP address and the device are necessary.
The following ways of connecting the devices with the PC for the configuration are possible:
• (1) via USB (recommended for the first configuration of the device)
• (2) via Ethernet in a local network
• (3) via Ethernet in a local network with an unknown or invalid IP address
• (4) via Router (IP address of device has to be known)
For information how to access the device for configuration see
Configurator, p. 15
Page 14 of 32
Connecting the Device in the CAN-Gateway
Configuration
4.01.0332.20000 Version 2.1