Icom IC-T22A Instruction Manual page 8

1 PANEL DESCRIPTION
memory number to transmit the corresponding
message (p. 30).
@ VOLUME SWITCHES [VOL] (p. 14)
vo. Push these switches to adjust the volume to the de-
sired level.
*"VOL' and the volume level indicators appear.
@ VFO MODE KEY [VFO(CLR)(M CLR)(A)]
(mw cia ™ Push this key to cancel most functions, then push
re)) again to select VFO mode (p. 11).
7 * When making a mistake during input, push this key to
cancel and start from the beginning.
'> In memory mode, while pushing [FUNC] push
this key to clear the selected memory (p. 18).
'» While pushing [PTT], this key sends a DTMF "A."
@ MEMORY MODE KEY [MR(MW)(B)]
uw _s "* Push this key to select memory mode (p. 11).
'* While pushing [FUNC] push this key to enter
memory writing mode (p. 17).
* Writing operation is: while pushing [FUNC], [MR(MW)],
[DIAL] then push and hold [MR(MW)].
'» While pushing [PTT], this key sends a DTMF "B."
@ LOG MEMORY KEY [LOGeM(T SCAN)(C)]
tscanc " Push this key to select a log memory or repeater
memory (p. 11).
'* While pushing [FUNC] push this key to start tone
scan when an optional" tone squelch is in use
(p. 31).
'* While pushing [PTT], this key sends a DTMF "C."
@ CALL MODE KEY [CALL(LOCK)(D)]
tock p "* Push this key to select the call channel (p. 11).
'» Push [FUNC] then this key to toggle the lock
function ON and OFF (p. 13).
**L' appears while the lock function is activated.
*(PTT], [POWER], [VOL], [MONI], [SQL], [H/L] and
[FUNC] can still be accessed while the lock function is
on.
'» While pushing [PTT], this key sends a DTMF "D,"
@ UP KEY [A(A SCAN)]
ascane " In VFO mode, push this key to increment the fre-
quency according to the selected tuning steps, in
: memory mode, push this key to increment the
memory channel (pgs. 11, 12).
> Push this key for 1 sec. to start full or memory
scan in the "up" direction (p. 22).
'*» While pushing [FUNC] push this key to start pro-
grammed or memory skip scan in the "up" direc-
tion (p. 22).
'» While pushing [PTT], this key sends a DTMF "F"