Icom IC-T22A Instruction Manual page 10

1 PANEL DESCRIPTION
» In memory mode, while pushing [FUNC] push
this key to toggle between frequency and mem-
ory name indication (p. 19).
'> In memory mode, while pushing [FUNC] push
this key for longer than 1 sec. to enter memory
name writing mode (p. 19).
prio "* While pushing [FUNC] push this key to start pri-
ority watch (p. 24).
* While in VFO mode priority watch becomes memory
channel watch; when the call channel is indicated, pri-
ority watch becomes call channel watch.
GO:
set In VFO mode, while pushing [FUNC] push this
@) keyto enter set mode.
* [A}[V] select set mode items and [DIAL] selects a set
mode condition while in set mode.
'» While pushing [FUNC] push this key then rotate
fo) [DIAL] to select a tuning step (p. 12).
Ds In VFO mode, while pushing [FUNC] push this
key to toggle the dial select step (p. 13).
@ EXTERNAL DC POWER JACK [DC13.5V]
Allows operation with a 13.5 V DC power source using the
optional cables, CP-12L or OPC-254L.
CAUTION: Operation with an external DC power
source simultaneously charges batteries inside the bat-
tery case or the battery pack. When using dry cell bat-
teries this may cause battery leakage and damage the
transceiver; when using a Ni-Cd battery pack this may
cause battery overcharging and shorten the life of the
7 battery pack.
@ BATTERY PACK RELEASE (p. 9)
Push to open the latch for battery pack removal.
Y{QWQQA WK