Icom IC-T22A Instruction Manual page 29

@ Priority watch
The priority watch checks for signals on a memory or call
channel every 5 sec. while operating on a VFO frequency.
The transceiver has 2 priority watch types to suit your needs.
You can transmit on the VFO frequency while the priority
watch operates.
When receiving a signal, priority watch pauses according to
the set scan resume condition.
Memory channel watch Call channel watch
{See |
OTE:
* Priority watch does not operate when the pager or code
squelch function is activated (pgs. 27, 28).
¢If the optional" pocket beep function is activated, the
transceiver automatically selects the tone squelch func-
tion when priority watch starts.
MUQ{QGV
ADVANCED FUNCTIONS 4
© Operation
® Select VFO; then, set a frequency.
@ Set the desired memory or call channel as the watching
channel.
' Push [MR] then rotate [DIAL] for a memory channel.
'» Push [CALL] for the call channel.
@ Push [FUNC] + [@PRIO] to start the watch.
The transceiver checks the memory or call channel frequency
every 5 sec.
* While the watch is pausing, pushing [(vFo)CLR] resumes the
watch manually.
@ Push [(vFo)CLR] while the display shows the VFO fre-
quency to stop the watch.
While pausing on a
memory channel,
"PRIO" flashes.