Icom IC-T22A Instruction Manual page 38

—f
OTHER FUNCTIONS
@ Beep tones ON/OFF = ==sermove
Beep tones sound when keys are pushed, when an operation
is performed, such as programming a memory, etc., and to
indicate invalid commands. These can be turned ON or OFF
as you prefer.
@® Push [FUNC] + [®SET] to enter set mode.
® Push [V] or [A] until "BE" appears.
@ Rotate [DIAL] to toggle beep tones
ON or OFF.
Bi Initial set mode
Initial set mode is accessed at power ON and allows you to
set seldom-changed settings. In this way you can "customise"
transceiver operation to suit your preferences and operating
style.
« POWER ON
© Entering initial set mode
While pushing [©SET] push [POWER] to turn power ON.
* The transceiver enters initial set mode and the last-selected (or de-
fault) item is displayed.
* Push [(vFo)CLR] to exit initial set mode and select VFO operation.
© Opening text
This item turns the opening text ON or OFF. Opening text is
the message that is displayed briefly when turning power ON.
The opening text message is stored in transmit message
memory TO and can be changed if desired (p. 29). The de-
fault for the opening text is "ICOM."
© Select initial set mode.
@ Push [V] or [A] until "OT" appears.
@ Rotate [DIAL] to select the desired
condition.
@ Push [(vFo)CLR] to set the condi-
tion and exit initial set mode.