VAT 571 Series Installation, Operating, & Maintenance Instructions
All-metal angle valve with double acting pneumatic actuator
Hide thumbs
Also See for 571 Series:
Table of Contents
Advertisement
Quick Links
All-Metal Angle Valve
with double acting pneumatic actuator
This manual is valid for the valve ordering number(s):
57124- . E14/24/34/44
57132- . E14/24/34/44
The fabrication number is indicated on each product as per the label
below (or similar):
made in Switzerland
Fabrication No.:
patented
571. . – . . . . – . . . . / . . . .
A – . . . . . .
Explanation of symbols:
Read declaration carefully before you start any other
action!
Attention!
Product is in conformity with EC guidelines,
if applicable!
Disconnect electrical power and compressed air
lines. Do not touch parts under voltage!
Read these «Installation, Operating & Maintenance Instructions» and the enclosed «General
Safety Instructions» carefully before you start any other action!
VAT Vakuumventile AG, CH-9469 Haag, Switzerland
Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com
Installation, Operating & Maintenance Instructions
Series 571, DN 16-40 (I.D.
. .
Fabrication number
/
-1
5
1
8
Keep body parts and objects away from the valve
opening!
Hot surfaces; do not touch!
Loaded springs and/or air cushions are potential
hazards!
Wear gloves!
www.vatvalve.com
/
")
2
270586EC
1/19
2009-03-04
Advertisement
Table of Contents
Related Manuals for VAT 571 Series
Summary of Contents for VAT 571 Series
- Page 1 Do not touch parts under voltage! Read these «Installation, Operating & Maintenance Instructions» and the enclosed «General Safety Instructions» carefully before you start any other action! VAT Vakuumventile AG, CH-9469 Haag, Switzerland 270586EC 1/19 Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com...
- Page 2 VAT products. The VAT firmware contains a limited, time unlimited user license. The VAT firmware may not be used for purposes other than those intended nor is it permitted to make copies of the VAT firmware. In particular, it is strictly forbidden to give copies of the VAT firmware to other people.
-
Page 3: Table Of Contents
7.1.1 Position indicators 80°C (single + double) in various versions with adapter.......... 15 7.1.2 Position indicators 200°C (single + double) in various versions with adapter........17 8 Warranty ................................. 19 VAT Vakuumventile AG, CH-9469 Haag, Switzerland 270586EC 3/19 Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com... -
Page 4: Use Of Product
") Use of product Use product for clean and dry indoor vacuum applications under the conditions indicated in chapter «Technical data» only! Other applications are only allowed with the written permission of VAT. Technical data Pressure range extreme UHV to 5 bar (abs) -
Page 5: Connections
With solenoid or pneumatic box (series 80) Connection «1» for air supply, connections «3» and «5» for exhaust Standard solenoid Solenoid for impulse actuation VAT Vakuumventile AG, CH-9469 Haag, Switzerland 270586EC 5/19 Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com... -
Page 6: Electrical Connection
Lo = position indicator «open» Lo = position indicator «open» Lg = position indicator «closed» Lg = position indicator «closed» VAT Vakuumventile AG, CH-9469 Haag, Switzerland 270586EC 6/19 Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com... - Page 7 Common plug for pos. indicator and solenoid, pos. indicator with make contact switches (option) power Lo = position indicator «open» Lg = position indicator «closed» VAT Vakuumventile AG, CH-9469 Haag, Switzerland 270586EC 7/19 Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com...
-
Page 8: Operation
200°C to 350°C must not exceed 30°C/h. Temperature differences exceeding 30°C throughout the valve are not allowed. They may affect the performance of the valve. VAT Vakuumventile AG, CH-9469 Haag, Switzerland 270586EC 8/19 Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com... -
Page 9: Behavior In Case Of Compressed Air Pressure Drop
If you need any further information, please contact one of our service centers. You can find the addresses on our website: http://www.vat.ch VAT Vakuumventile AG, CH-9469 Haag, Switzerland 270586EC 9/19 Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com... -
Page 10: Maintenance & Repairs
Contamination from the process may influence the function and requires more frequent maintenance. Before carrying out any maintenance or repairs, please contact VAT. It has to be individually decided whether the maintenance/repair can be performed by the customer or has to be carried out by VAT. The fabrication number on the valve made in Switzerland Fabrication No.:... -
Page 11: Preventive Maintenance
DN 100 closing torque of Vatring screw (fig.67) 7 Nm closing torque of bonnet screw (fig.69) 7 Nm VAT Vakuumventile AG, CH-9469 Haag, Switzerland 270586EC 11/19 Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com... -
Page 12: Drawing
Installation, Operating & Maintenance Instructions Series 571, DN 16-40 (I.D. ") Drawing VAT Vakuumventile AG, CH-9469 Haag, Switzerland 270586EC 12/19 Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com 2009-03-04... -
Page 13: Spare Parts
D-57124-..D-57132-... bonnet seal (216767) (90368-R1) Pneumatic seal kit (Elastomer seals inside 218912 93821-R1 the pneumatic actuator) VAT Vakuumventile AG, CH-9469 Haag, Switzerland 270586EC 13/19 Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com 2009-03-04... - Page 14 43/7 Sound absorber N-7705-001 43/3 43/2 43/8 Socket N-8501-300 43/9 Coil** N-7510-2** **) Specify voltage! (e.g. N-7510-2-220V 50Hz) VAT Vakuumventile AG, CH-9469 Haag, Switzerland 270586EC 14/19 Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com 2009-03-04...
-
Page 15: Position Indicators 80°C (Single + Double) In Various Versions With Adapter
42/6 Socket N-8504-002 42/7 Screw 211199 42/8 Screw N-6024-531 42/9 Pressure spring N-6240-303 42/10 Spring ring N-6160-406 VAT Vakuumventile AG, CH-9469 Haag, Switzerland 270586EC 15/19 Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com 2009-03-04... - Page 16 42/8 Screw 211199 42/9 Screw N-6024-531 42/10 Spring ring N-6160-406 42/11 Pressure spring N-6240-303 42/13 Socket N-8504-002 VAT Vakuumventile AG, CH-9469 Haag, Switzerland 270586EC 16/19 Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com 2009-03-04...
-
Page 17: Position Indicators 200°C (Single + Double) In Various Versions With Adapter
42/6 Bolt 81349-01 42/8 Screw 211199 42/9 Screw N-6024-531 42/10 Spring ring N-6160-406 42/11 Pressure spring N-6240-303 VAT Vakuumventile AG, CH-9469 Haag, Switzerland 270586EC 17/19 Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com 2009-03-04... - Page 18 42/6 Bolt 80423-01 42/8 Screw 211199 42/9 Screw N-6024-531 42/10 Spring ring N-6160-406 42/11 Pressure spring N-6240-303 VAT Vakuumventile AG, CH-9469 Haag, Switzerland 270586EC 18/19 Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com 2009-03-04...
-
Page 19: Warranty
(including any delay in or failure to deliver), packaging, storage or use of any product sold or delivered by VAT shall fail to conform to the...
Need help?
Do you have a question about the 571 Series and is the answer not in the manual?
Questions and answers