Replacing The Grass Deflector - Toro Z Master Professional 6000 Series Operator's Manual

Figure 104
1. Clutch pulley
2. Mower belt
3. Spring-loaded idler pulley
4. Ratchet
7. Remove and retain the hardware on both sides
of the deck as shown in
g009038
5. Square hole in the idler
arm for the ratchet
6. Idler grease fitting
7. Belt guide
Figure 105.
1. Right stabilizer
2. Deck strut (right side shown)
3. Remove the shoulder bolt and nut.
4. Remove the shoulder bolt and nut.
8. Raise the deck struts and secure them in the
up position.
9. Slide the deck out to the right side of the
machine.
Replacing the Grass
Deflector
WARNING
An uncovered discharge opening could allow
the lawn mower to throw objects at you or
bystanders, resulting in serious injury. Also,
contact with the blade could occur.
Do not operate the lawn mower unless you
install a cover plate, mulch plate, grass
deflector, or bagger.
1. Remove the locknut, bolt, spring, and spacer
holding the deflector to the pivot brackets
(Figure 106).
2. Remove the damaged or worn grass deflector
(Figure 106).
68
Figure 105
g009197