Using The Clutch Shim - Toro Z Master Professional 6000 Series Operator's Manual

Figure 68
1. Spring washers
2. Locknut
g001297
3. Dust cap

Using the Clutch Shim

Some later model year units have been built with
clutches that contain a brake shim. When the clutch
brake has worn to the point where the clutch no longer
engages consistently, you can remove the shim to
extend the clutch life.
1. Armature
2. Field shell
3. Rotor
4. Brake-mounting bolt
Removing the Clutch Shim
1. Shut off the engine, wait for all moving parts to
stop, and remove the key.
2. Engage the parking brake and wait for machine
to cool completely.
3. Using an air compressor, blow out any debris
under the brake pole and around the brake
spacers.
51
Figure 69
5. Brake spacer
6. Regap shim
7. Brake pole
g010869