When installing:
• Before you attach the heatsink assembly to the computer, apply thermal grease, at an amount of 0.2
grams, on the part marked
application of grease can cause a thermal problem due to imperfect contact with a component.
1070 Power button module with or without fingerprint reader
For access, remove these FRUs in order:
• "1010 Base cover assembly" on page 59
• "1060 Heatsink assembly" on page 65
Removal steps of the power button module with or without fingerprint reader
66
ThinkPad X13s Gen 1 Hardware Maintenance Manual
a
as shown in the following illustrations. Either too much or too less