Table of Contents
Advertisement
Step 2.
Install the world facing camera and camera cable in reverse order.
When installing: Ensure that the connector is attached firmly to the system board.
Power button with or without fingerprint reader
Follow the instructions to replace the power button with or without fingerprint reader.
For access, remove these FRUs in order:
• "ThinkPad Pen Pro (for ThinkPad L13 2-in-1 Gen 5 only)" on page 62
• "Base cover assembly" on page 63
• "Built-in battery" on page 65
• "Keyboard" on page 66
• "M.2 solid-state drive" on page 68
• "Wireless WAN card (for selected models)" on page 70
• "Thermal fan and heatsink assembly" on page 71
• "I/O connectors brackets" on page 73
• "Fingerprint reader cable (for selected models)" on page 73
• "System board" on page 82
Step 1.
Remove the power button with or without fingerprint reader as shown below.
90
ThinkPad L13 Gen 5,ThinkPad L13 2-in-1 Gen 5 and ThinkPad S2 Gen 9 Hardware Maintenance Manual
Advertisement
Table of Contents
