Steps
1. Adhere the coin-cell battery to the slot on the palm-rest and keyboard assembly.
2. Connect the coin-cell battery cable to the I/O board.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
3. Exit
Service
Mode.
Memory module
Removing the memory module
Prerequisites
1. Follow the procedure in
2. Enter
Service
Mode.
3. Remove the
base
cover.
About this task
The following image indicates the location of the memory modules and provides a visual representation of the removal
procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
21