Table of Contents
Advertisement
IFC130-P_EN
5/08/05
9:48
Manual Installation
Return
Standard
Reception
Channel search
Fine tuning
Store on number
Channel name
Decoder
Teletext char. set
Choose you standard, then select reception.
Page 7
Manual channel set-up
Follow the procedure given on this page if you find that some channels have not been
stored during the initial set-up.This can happen if you are setting up cable network
channels. Setting up channels manually requires every setting for a particular channel to be
entered, one at a time.
I...
Aerial...
OVERVIEW
Display the
CH 10
option and press
01
Installation
BBC1
1...
1.
Select the
country.
Note: The following standards are available to choose from:
for France and Luxembourg,
BG
for Western Europe,
2.
Select the
cable network) using the
3.
Select the
use the
is displayed.
4.
If the picture is not clear you can adjust the setting.You do this by selecting the
tuning
option and adjusting it with the
5.
Select the
buttons. If none of the names available is suitable select
buttons to select a character from the list made up of the letters in the standard
alphabet, the numbers 0 to 9 and certain punctuation symbols. Use the
go to another character. Press
6.
If the channel is encoded and you want to connect a decoder to the AV1 socket, select
Decoder
the
7.
Then select the
used for Teletext on this channel using the
are available:
1:Western Europe
2: Eastern Europe
3: Russian and Bulgarian 7: Belarussian
4: Greek
8.
Then select the
this channel using the numeric buttons (for instance, for BBC1 type 01). Press
Important: Whenever you change a value in the
on number
number
change channels or put the TV set in standby.
Repeat this procedure to find other channels.
Notes:
- For cable networks, to search for missing channels, select
Automatic update
select
- If you wish to go through the whole initial set-up process, put the TV in standby mode, then hold
down the
until the menu displays. Proceed as for the initial set-up.
- Subsequent set-ups:
Automatic update
- The
channels that are missing or wrongly set up.
Automatic search
- The
(e.g. after moving house). This process deletes all channels previously stored. To set up a new
channel, it is better to use
menu by pressing the
Manual installation
OK
to confirm. Select the
menu and press
OK
to confirm.
Standard
option. Use the
DKK'
for Eastern Europe, the Middle East and Asia,
Australia
for Australia, and
Reception
option. Select the reception method for the channels (aerial or
buttons.
Channel search
option. Enter the number of the reception channel or
buttons to find the channels.When a channel has been found the picture
Channel name
option and choose a name from the list using the
OK
to confirm.
option and check the box by pressing
Teletext char. set
option and choose the character set that will be
5: Arabic
6: Ukrainian
Store on number
option and enter the number to be assigned to
Manual Installation
option starts flashing. To confirm your change you need to select the
OK
option and press
. If you do not confirm the change it will be cancelled when you
Automatic installation
in the
VOL
button on the television and the
function allows you to set up channels just launched or any
function is used for setting up channels after the initial set-up
Automatic update
7
Channel set-up
Installation
MENU
button. Select the
option from the
buttons to select the standard for your
I
France
for the UK and Ireland,
EURO
New Zealand
for New Zealand.
buttons.
CH _ _ _ _
. Use the
buttons to
OK
.
buttons.The following character sets
OK
Store
menu, the
Store on
Other
instead of a country, then
menu.
MENU
button on the remote control
Manual Installation
or
.
EN
Fine
.
Advertisement
Table of Contents
