Manual Channel Set-Up - THOMSON IFC230 User Manual

Manual Installation
Return
Standard I...
Reception Aerial...
Channel search CH 10
Fine tuning
Store on number 01
Channel name BBC1
Decoder
Teletext char. set 1...
Teletext adjustment
Choose you standard, then select reception.

Manual channel set-up

Follow the procedure given on this page if you find that some channels have not been
stored during the initial set-up.This can happen if you are setting up cable network
channels. Setting up channels manually requires every setting for a particular channel to be
entered, one at a time.
OVERVIEW
Display the menu by pressing the
OK
option and press to confirm. Select the
Installation
menu and press
1.
Standard
Select the option. Use the
country.
Note: The following standards are available to choose from:
DKK'
for France and Luxembourg,
BG Australia
for Western Europe,
2.
Reception
Select the option. Select the reception method for the channels (aerial or
cable network) using the
3.
Channel search
Select the
use the buttons to find the channels.When a channel has been found the picture
is displayed.
4.
If the picture is not clear you can adjust the setting.You do this by selecting the
tuning
option and adjusting it with the
5.
Channel name
Select the
buttons. If none of the names available is suitable select
buttons to select a character from the list made up of the letters in the standard
alphabet, the numbers 0 to 9 and certain punctuation symbols. Use the
go to another character. Press
6.
If the channel is encoded and you want to connect a decoder to the AV1 socket, select
Decoder
the option and check the box by pressing
7.
Teletext char. set
Then select the
used for Teletext on this channel using the
are available:
1:Western Europe, Greek
2: Eastern Europe
3: Russian, Belarussian
8.
To improve Teletext reception, select the Teletext adjustment option and adjust using
the buttons.
9.
Store on number
Then select the
this channel using the numeric buttons (for instance, for BBC1 type 01). Press
Important: Whenever you change a value in the
on number
option starts flashing. To confirm your change you need to select the
number OK
option and press
change channels or put the TV set in standby.
Repeat this procedure to find other channels.
Notes:
- For cable networks, to search for missing channels, select
Automatic update
select
- If you wish to go through the whole initial set-up process, put the TV in standby mode, then hold
down the VOL button on the television and the
until the menu displays. Proceed as for the initial set-up.
- Subsequent set-ups:
Automatic update
- The
channels that are missing or wrongly set up.
Automatic search
- The
(e.g. after moving house). This process deletes all channels previously stored.
7
Channel set-up
MENU
button. Select the
Manual installation
OK
to confirm.
buttons to select the standard for your
I
for the UK and Ireland,
for Eastern Europe, the Middle East and Asia,
New Zealand
for Australia, and
buttons.
option. Enter the number of the reception channel or
buttons.
option and choose a name from the list using the
CH _ _ _ _
OK
to confirm.
OK .
option and choose the character set that will be
buttons.The following character sets
4: Arabic
5: Ukrainian
option and enter the number to be assigned to
Manual Installation
. If you do not confirm the change it will be cancelled when you
Other
Automatic installation
in the
MENU button on the remote control
function allows you to set up channels just launched or any
function is used for setting up channels after the initial set-up
Installation
option from the
France
EURO
for New Zealand.
Fine
. Use the
buttons to
OK .
Store
menu, the
Store on
instead of a country, then
menu.
EN