Table of Contents
Advertisement
04_ETC_310_EN1
13/07/05
Remote control
TV functions on the remote control
Most of the functions of your television set are accessible from the menus that are displayed on screen.The remote control
delivered with the set allows you to navigate through the menus and carry out all the adjustments.
EN
Important: If the remote control batteries are flat, you can use the buttons on the front of the television set which have the same functions as the
remote control keys.
11:50
Page 4
(Noir/Process Black film)
TV
VCR
DVD
SAT
AUX
AMP
Control light
ANALOG
DIGITAL
RADIO
ZOOM
LIGHT
PRESETS
LIST
INFO
GUIDE
TEXT
With digital reception, the colour keys allow access to the specific functions of
certain menus.
The colour keys are also used with teletext operations.
OK
MENU
EXIT
CANCEL
PR+/PR-
0-9
AV
Standby / exit standby.
Access TV mode.To control the television set, press this key.
Access to VCR mode.
Access to DVD mode.
Access to SAT mode.
Access to AUX mode.
Access to AMP mode.
Information:
- lights when you press a key,
- if the batteries are flat, flashes when you press a key.
Switching to analogue reception .
Switching to digital reception .
Switching to digital radio mode .
Changing the size of the mixed screen (see page 17).
Remote control lighting.
Picture and sound preferences menu .
Channel list (see page 18).
Information about the channel (see page 17 or 22).
Programme guide (see page 21).
Teletext (see page 21).
Selection of options in menus.
Adjusting functions, modifying values, activating and de-activating
functions (tick boxes) in menus.
Selecting the picture format or zoom.
Confirming a selection, activating and de-activating functions (tick
boxes) in menus.
Access to OVERVIEW.
Exiting the menu system.
Adjusting the sound volume.
+/-
Muting and re-establishing sound.
MUTE
Returning to the previous AV programme or channel.
When in menus, to return to the previous menu.
Changing channel.
Selecting a channel by number.
For channel numbers with more than one digit:
- in analogue mode, press 0 to display "--", then enter the channel
number,
- in digital mode, simply enter the digits one after the other.
Selecting a device connected to an AV connector.
4
Advertisement
Table of Contents
