Table of Contents
Advertisement
ITC008-EN-2
24/03/04
13:06
Getting started
Remote control TV functions
Most of your television's functions are available via the menus that appear on the screen.The remote control supplied with
your set can be used to navigate through the menus and to configure all the general settings.The remote control and its
functions may vary depending on the model of television.The rest of this page contains the description of the most
comprehensive remote control. Optional remote control features are indicated by the symbol
EN
Important:
If the batteries in your remote control are run down, you can use the buttons on the front of your set, as they have the same functions as those
on the remote control.
Page 4
DVD
VCR
TV
light
+/-
RETURN
PR+/PR-
EXIT
MENU
OK
PRESETS
Zzz/LIST
INFO
GUIDE
TEXT
The coloured buttons can also be used for operating Teletext.
0-9
AV
RADIO
Standby / quit standby.
To access DVD mode.
To access VCR mode.
To access TV mode.
Press this button to control the television. If you do not have
this button on your remote control, it means that you can
access the TV functions directly, without pressing a button
beforehand.
To provide information:
- it lights up when you press a button,
- it indicates the status when the remote control is being
programmed (see page 5),
- if the batteries are run down, it flashes when you press a
button.
To control the volume.
This function is also available in
To switch the sound off and back on again.
To return to the previous menu.
To change channels.
To close a menu.
To access the OVERVIEW menu.
To select menu options.
To set functions, change values, enable and disable functions.
4/3 models: to select the picture format
16/9 models: to select the zoom function.
To confirm a selection.
Coloured buttons:
(red button) picture preset settings
(green button) sleep timer
(yellow button) status information
(blue button) disabled in TV mode
(purple button) Teletext
To select a channel by its number. In the case of channel
numbers with two digits:
- press the two digits quickly, or
- press 0 twice to display "--", then enter the channel number.
To select an appliance connected to an AV socket.
To access Radio mode.
4
.
and
modes.
VCR
DVD
Advertisement
Table of Contents
