Installing The Front Left Fuel Tank - KTM 450 RALLY FACTORY REPLICA 2023 Owner's Manual

12.30

Installing the front left fuel tank

–
Pull off fuel tank breather hose
–
Remove screws
–
Take off the fuel tank.
Info
Set the fuel tank down in an upright position as other-
wise fuel can escape from the fuel tank breather at the
fuel tank filler cap.
A00745-11
Main work
–
Position fuel tank, and mount and tighten screws
Guideline
Screw, front fuel tank M8
–
Mount fuel tank breather hose
A00744-11
–
Remove the wash cap set.
–
Clean quick release coupling
air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
–
Spray silicone spray onto a lint-free cleaning cloth and lightly
lubricate the O-ring of the quick-release coupling.
F02404-10
Silicone spray (
–
Join quick release coupling
–
Join the plug-in connector of fuel pump
–
Remove the wash cap set.
–
Clean quick release coupling
air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
–
Spray silicone spray onto a lint-free cleaning cloth and lightly
lubricate the O-ring of the quick-release coupling.
A00478-11
Silicone spray (
–
Join quick release coupling
–
Position the fuel line in the holder.
Finishing work
–
Install the engine guard. (
–
Mount side cover. (
SERVICE WORK ON THE CHASSIS 12
3
.
4
.
8 Nm (5.9 lbf ft)
2
.
3
thoroughly with compressed
p. 164)
3
.
4
5
thoroughly with compressed
p. 164)
5
.
p. 89)
p. 88)
1
.
.
75