Removing The Main Silencer; Installing The Main Silencer; Changing The Glass Fiber Yarn Filling Of The Main Silencer - KTM 450 RALLY FACTORY REPLICA 2023 Owner's Manual

12.25

Removing the main silencer

Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
12.26

Installing the main silencer

12.27

Changing the glass fiber yarn filling of the main silencer

Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Over a period, the fibers of the rock wool escape into the air, and the silencer "burns out".
Not only is the noise level higher, the performance characteristic changes.
–
Detach springs
Spring hook (50305017000C1)
–
Remove screw
A00453-10
–
Position the main silencer. Mount screw
tighten yet.
–
Attach springs
Spring hook (50305017000C1)
–
Tighten screw
Guideline
Remaining screws,
chassis
A00453-11
Preparatory work
–
Remove main silencer. (
SERVICE WORK ON THE CHASSIS 12
1
.
2
and take off the main silencer.
1
2
.
1
.
M8 25 Nm (18.4 lbf ft)
p. 71)
, but do not
71