Changing The Hydraulic Clutch Fluid - KTM 450 RALLY FACTORY REPLICA 2023 Owner's Manual

Table of Contents

Advertisement

12.44

Changing the hydraulic clutch fluid

Warning
Skin irritation Brake fluid causes skin irritation.
Keep brake fluid out of the reach of children.
Wear suitable protective clothing and safety glasses.
Do not allow brake fluid to come into contact with the skin, the eyes or clothing.
Consult a doctor immediately if brake fluid has been swallowed.
Rinse the affected area with plenty of water in the event of contact with the skin.
Rinse eyes thoroughly with water immediately and consult a doctor if brake fluid comes into contact
with the eyes.
If brake fluid spills on to your clothing, change the clothing.
Remove screw
Take off fuel pump controller
L03162-10
Move the hydraulic clutch fluid reservoir mounted on the han-
dlebar to a horizontal position.
Remove screws
Take off cover
Check fluid level.
A
Fluid level
tainer rim
»
If the level of the fluid does not meet specifications:
Correct the fluid level of the hydraulic clutch.
Brake fluid DOT 4 / DOT 5.1 (
Position cover
3
screws
.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
L03086-10
Position fuel pump controller
Mount and tighten screw
L03162-10
SERVICE WORK ON THE CHASSIS 12
1
.
2
and hang to the side.
3
.
4
5
with membrane
.
4 mm (0.16 in)
below con-
p. 162)
4
5
with membrane
. Mount and tighten
2
.
1
.
85

Advertisement

Table of Contents
loading

Table of Contents