Installing The Lower Triple Clamp - KTM 450 RALLY FACTORY REPLICA 2023 Owner's Manual

12.10

Installing the lower triple clamp

Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing.
–
Check whether upper steering head seal
tioned.
–
Slide on protective ring
A00466-10
–
Position the upper triple clamp.
–
Mount screw
F02400-10
–
Position the fork legs.
Bleeder screws
Info
Grooves are milled into the side of the upper end of the
fork legs. The second milled groove (from the top) must
be flush with the upper edge of the upper triple clamp.
F02401-10
–
Tighten screws
Guideline
Screw, bottom triple
clamp
A00468-12
SERVICE WORK ON THE CHASSIS 12
p. 164)
1
2 3
and O-ring
4
, but do not tighten yet.
5
are positioned toward the front.
6
.
M8
is correctly posi-
.
17 Nm (12.5 lbf ft)
61