Scan - Sony DCR-TRV30 Operating Instructions Manual

Searching for a photo
- Photo search/Photo scan
You can search for a still image you have recorded on a tape (photo search).
You can also search for still images one after another and display each image for
5 seconds automatically regardless of cassette memory (photo scan). Use the Remote
Commander for these operations.
Use this function to check or edit still images.
Before operation
• You can use this function only when playing back a tape with cassette memory.
• Set CM SEARCH in _ to ON in the menu settings (p. 103). (The default setting is
ON.)
(1) Set the POWER switch to VCR.
(2) Press SEARCH
MODE on the Remote Commander repeatedly, until the
PHOTO SEARCH indicator appears.
The indicator changes as follows:
TITLE SEARCH _ DATE SEARCH _ PHOTO SEARCH
no indicator , PHOTO SCAN
(3) Press _ or _ on the Remote Commander to select the date for playback.
Your camcorder automatically starts playback of the photo having the date
that you selected.
66
MENU
To stop searching
Press II.
In the _ mark
• The bar in the I_ZII] mark indicates the present point on the tape.
• The I mark in the [_EKII1 indicates the actual point you are trying to search.
If a tape has a blank portion between recorded portions
The photo search/photo scan function may not work correctlv.
The available number of photos that can be searched usingthe cassettememory
The axailable number is up to 12 photos. Howex er, you can search 13 photos or more
using the scanning photo function.