Nightshot; Recording - Sony DCR-TRV30 Operating Instructions Manual

Recording a picture
Using Super NightShot
Tho Super NightShot modo makos subjects moro than 16 timos brighter than thoso
recorded in the NightShot mode.
(1) Slide NIGHTSHOT to ON in CAMERA mode. [] and "NIGHTSHOT"
indicators flash on the screen.
(2) Press SUPER NIGHTSHOT. S[] and "SUPER NIGHTSHOT" indicators flash
on the screert.
To cancel the Super NightShot mode, press SUPER NIGHTSHOT again.
Using the NightShot Light
The picturo will bo clearer with the NightShot Light on. To onablo tho NightShot Light,
set N.S. LIGHT to ON in the menu settings (p. 99).
Notes
• Do not use the NightShot function in bright places (ex. the outdoors in the daytime).
This may cause your camcorder to malfunction.
• When you keep NIGHTSHOT set to ON in normal recording, the picture may be
recorded in incorrect or unnatural colors.
• If focusing is difficult with the autofocus mode when using the NightShot function,
focus manually.
While using the NightShot function, you cannot use the following functions:
Exposure
- PROGRAM AE
White balance
While using the Super NightShot function
The shutter speed is automatically adjusted depending on the brightness. At that time,
the moving picture may be slow down.
While using the Super NightShot function, you cannot use the following
functions:
Fader
Digital effect
- PROGRAM AE
Exposure
- White balance
Recording with the flash
When the POWER switch is set to MEMORY
You cannot use the Super NightShot function.
NightShot Light
NightShot Light rays are infrared and so are invisible. The maximum shooting distance
using the NightShot Light is about 3 m (10 feet).
26