Preventing Accidental Erasure; Image Protection - Sony DCR-TRV30 Operating Instructions Manual

Preventing accidental erasure
- Image protection
To prevent accidental erasure of important images, you can protect selected images.
Before operation
Insert a "Memory Stick" into }Tour camcorder.
(1) Set the POWER switch to MEMORY or VCR. Make sure that the LOCK switch
is set to the left (unlock) position.
(2) Select the image you want to protect.
(3) Press MENU to display the menu.
(4) Turn the SEL/PUSH EXEC dial to select Q, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select PROTECT, then press the dial.
(6) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(7) Press MENU
to make the menu display disappear. The "o--," mark is
displayed beside the data file name of the selected image.
MENU
,_ ,_6'TE set
. DELETE ALL
_TC FORMAT
_RETR
[_'E blU ] E!_D
3
0
N"
o
I
To cancel image protection
Soloct OFF in stop 6, thon pross tho SEL/PUSH EXEC dial.
Note
Formatting erases all information on the "Memory Stick," including the protected
image data. Check the contents of the "Memory Stick" before formatting.
If the write-protect tab on the "Memory Stick" is set to LOCK
You cannot carry out image protection.
149