Quickly Locating; Set Memory Function - Sony DCR-TRV30 Operating Instructions Manual

Quickly locating a scene using the zero
set memory function
Your camcorder goes forward or backward to automatically stop at a desired scene
having a tape counter value of "0:00:00". Use the Remote Commander for this
operation.
(1) In the playback mode, press DISPLAY.
(2) Press ZERO SET MEMORY at the point you want to locate later. The tape
counter shows "0:00:00" and the ZERO SET MEMORY indicator flashes.
(3) Press • when you want to stop playback.
(4) Press _1_ to rewind the tape to the tape counter's zero point. The tape stops
automatically when the tape cotmter reaches approximately zero. The ZERO
SET MEMORY indicator disappears and the time code appears.
(5) Press _. Playback starts from the counter's zero point.
DISPLAY
ZERO SET MEMORY
Notes
• When you press ZERO SET MEMORY bofore rewinding the tape, the zoro set momory
function will be canceled.
• There mav be a discrepancy of several seconds from the time code.
If a tape has a blank portion in the recorded portions
The zero set memory function mav not work correctly.
Zero set memory function also in the standby mode
When you insert a scene in the middle of a recorded tape, press ZERO SET MEMORY at
the point you want to end the insertion. Rewind the tape to the insert start point, and
start recording. Recording stops automatically at the tape counter zero point. Your
camcorder returns to the standby mode.
62