Playing Back Still Images In Sequence - Photo Scan - Sony Handycam DCR-HC20 Operation Manual

choosing the recording date on 1he screen. ([CM
SEARCII] is set m [ON] by default).
When you are using a cassetle that does not
have Cassette Memory, your camcorder
searches 1he still image automatically regardless
oflhe recording date,
.-- SEARCH M.
_-- STOP
1 Slide the POWER switch repeatedly to
select the PLAY/EDIT mode.
Press SEARCH M. on the Remote
Commander repeatedly to select
[PHOTO SEARCH I.
Press _ (previous)/l_l_l (next) on
the Remote Commander to select the
date or photo for playback.
When your cassette has Cassette Memory,
you can select the recorded date.
When your cassette does not have Cassette
Memory, your camcorder selects the still
image belbre and behind the current point
of the tape.
Playback of the pholo starts automatically
at fl_e selected scene.
To cancel the operation
Press STOP on the Remote Commander.
0 Note
• Photo search wl]] not function cor_ctly whml there
is a blank section between recorded sections on the
tape.
You can also locate still images one after
another and display each images for 5 seconds
automatically.
-- SEARCH M.
. ==o NII_ / I1,.1_1
o.-- STOP
Slide the POWER switch repeatedly to
select the PLAY/EDIT mode.
Press SEARCH M. on the Remote
Commander repeatedly to select
IPHOTO SCANI.
Press _ (previoas)/ImHl_-I (next) on
the Remote Commander.
Each photo will he played back lbr about 5
seconds.
To cancel the operation
Press STOP on lhe Remote Commander.
O
Note
• Photo _m_ will not _nction correctly when there is
a blank section between _corded sections on the
tape.
42 Playback