Editing - Sony DCR-TRV30 Operating Instructions Manual

Dubbing only desired scenes - Digital program editing
(2) Setting the modes to cancel the recording pause on the VCR
@ Turn the SEL/PUSH EXEC dial to select PAUSEMODE, then press the dial.
@ Turn the gEL/PUSH EXEC dial to select the mode to cancel recording pause
on the VCR, then press the dial.
OT_ERS
EDIrSEr
CONTROL
aDJ rEST
vcom IN =
vcom OUr ¸¸
_ J_ rEST
_RETORt4
[r_ENU] Et40
The buttons to cancelrecording pause on the VCR
The buttons vary depending on your VCR. To cancel recording pause,:
Select "PAUSE" if the button to cancel recording pause is ||.
- Select "REC" if the button to cancel recording pause is Q.
Select "PB" if the button to cancel recording pause is IP--.
(3) Setting your camcorder and the VCR to face each other
Locate the infrared rays emitter of your camcorder and face it towards the remote
sensor of the VCR.
Set the devices about 30 cm (12 in.) apart, and remove any obstacles between the
devices.
Infrared ravs emitter
VCR
Remotc_sensor
/V connecting cable
73