Superimposing A Still Image In A; Picture - Memory Mix - Sony DCR-TRV30 Operating Instructions Manual

Superimposing a still image in a "Memory Stick" on a moving
picture - MEMORY MIX
Before operation
• Insert a tape for recording into your camcorder.
• Insert a recorded "Memorv Stick" into your camcorder.
(1) Set the POWER switch to CAMERA or MEMORY.
Make sure that the LOCK switch is set to the left (unlock) position.
(2) Press MEMORY MIX in the standby mode.
The last recorded still image on "Memory Stick" appears on the lower part of
the screen as a thumbnail image.
(3) Press MEMORY+/- to select the still image you want to superimpose.
To see the previous image, press MEMORY -. To see the next image, press
MEMORY+.
(4) Turn the SEL/PUSH EXEC dial to select the desired mode.
The mode changes as follows:
M.CHROM _ M.LUMI _ C.CHROM _ M. OVERLAP
(5) Press the SEL/PUSH EXEC dial.
The still image is superimposed on the moving picture. Your camcorder
automatically returns to the standby mode.
(6) Turn the SEL/PUSH EXEC dial to adjust the effect.
(7) Press START/STOP in CAMERA mode, or press PHOTO in MEMORY mode
to start recording.
130
2
MEMORY M IX
Still irnag_
5