Searching The Boundaries; Tape By Title - Title Search; Date Search; Photo Search/Photo - Sony DCR-TRV30 Operating Instructions Manual

Searching the boundaries of recorded
tape by title - Title search
If you use a tape with cassette memory, you can search for the boundaries of
recorded tape by title. Use the Remote Commander for this operation.
Before operation
Set CM SEARCH in _ to ON in the menu settings (p. 103). (The default setting is ON.)
(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly, until the TITLE
SEARCH indicator appears.
The indicator changes as follows:
C TITLE SEARCH ---* DATE SEARCH ---* PHOTO SEARCH
no indicator _ PHOTO SCAN *_
(3) Press _ or _ on the Relnote Commander to select the title for playback.
Your camcorder automatically starts playback of the scene having the title that
you selected.
T_TLE SEARCH
SEARCH _ HELLO!
CONGRATULAT ONS
MODE 3 HAppy NEIi yE4R!
4 PRESENT
GGOD MORN I NG
I'EDDING
MENU
=<
-o
g
o
0
==
To stop searching
Press II.
If you use a tape without cassette memory
You cannot superimpose or search a title.
In the _ mark
• Tire bar in the 1_i .............. I mark indicates tire present point on the tape.
• Tire I mark in the _ indicates tire actual point you are trying to search.
If a tape has a blank portion between recorded portions
Tho title search function may not work corroctlv.
To superimpose a title
See page 91.
63