Sony DCR-TRV30 Operating Instructions Manual page 80

Dubbing only desired scenes - Digital program editing
To stop dubbing during editing
Press • using the video operation buttons.
To end the Digital program editing function
Your camcorder stops when the dubbing is complete. Then the display returns to
VIDEO EDIT in the menu settings.
Press MENU to end the program editing function.
You cannot record on the VCR when:
-The tape has run out.
The write-protect tab on the cassette is set to lock.
The IR SETUP code is not correct. (When IR is selected.)
The button to cancel recording pause is not correct. (When IR is selected.)
NOT READY appears on the LCD screen when:
-The program to operate the Digital program editing has not been made.
i.LINK is selected but an i.LINK cable (DV connecting cable) is not connected.
-The power of the connected VCR is not turned on. (when you set i.LINK.)
8O