The Recording; - End Search / Editsearch / Rec Review - Sony DCR-TRV30 Operating Instructions Manual

Checking the recording
- END SEARCH / EDITSEARCH / Rec Review
You can use these buttons to check the recorded picture or shoot so that the transition
between the last recorded scene and the next scene you record is smooth.
You can go to the end of the recorded section after you record.
Press END SEARCH in the standby mode.
The last five seconds of the recorded section are played back and your camcorder
returns to the standby mode. You can monitor the sound from the speaker or
headphones.
You can search for the next recording start point.
Hold down the +/ @ side of EDITSEARCH in the standby mode. The recorded section
is played back.
+ : to go forward
- @: to go backward
Release EDITSEARCH to stop playback. If you press START/STOP, re-recording begins
from the point you released EDITSEARCH. You cannot monitor the sound.
You can check the last recorded section.
Press the @ side of EDITSEARCH monrentarily in the standby mode.
The section you have stopped nrost recently will be played back for a few seconds, and
then your canrcorder will return to the standby mode. You can monitor the sound front
the speaker or headphones.
End search function
When you use a tape without cassette inemory, the end search function does not work
once you eject the cassette after you have recorded on the tape. If you use a tape with
cassette memory, the end search function works even once you eject the cassette.
If a tape has a blank portion in the recorded portions
The end search function mav not work correctly.
28