The Power Supply; The Battery Pack - Sony DCR-TRV30 Operating Instructions Manual

Step 1 Preparing the power supply
Use the battery pack after charging it for your canrcorder.
Your camcorder operates only with the "InfoLITHIUM" battery pack (M series).
See page, 166 for details of "InfoLITHIUM" battery pack.
(1) Open
the DC IN jack cover and colmect the AC power adaptor supplied with
your camcorder to the DC IN jack with the plug's • mark facing up.
(2) Connect the power cord to the AC power adaptor.
(3) Connect the power cord to the wall outlet.
(4) Set the POWER switch to OFF (CHG). Charging begins. The remaining battery
time is indicated in minutes on the display window.
When the remaining battery indicator changes to _'_'_3,normal charge is completed. To
fully charge the battery (full charge), leave the battery pack attached for about one hour
after normal charge is completed until FULL appears in the display window. Fully
charging the battery allows you to use the battery longer than usual.
8_
2
1
After charging the battery pack
Disconnect the AC power adaptor from the DC IN jack on your camcorder.
Note
Prevent mc,tallic objects from coming into contact with the metal parts of the DC plug of
the AC power adaptor. This mav cause a short-circuit, damaging the AC power
adaptor.
13