Table of Contents
Advertisement
Step 1 Preparing
the power
supply
Use tile battery
pack after charging
it fbr your camcorder.
Your camcorder
operates
only with the "Inf,)LITHIUM"
battery
pack (L series).
See page 65 for more information
about
"InIoLITHIUM"
batte W pack.
(1) Open the DC IN jack cover and connect the AC power adaptor supplied with
your camcorder to the DC IN jack with the plug's • mark f>ming up.
(2) Connect the power cot'd to the AC power adaptor.
(3) Connect the power cord to a wall outlet.
(4) Set the POWER switch to OFF (CHARGE). Charging begins, and the CHG
lamp lights up.
When the CHG lamp goes out, the chalging is completed.
4
CHG lamp
After
charging
the battery
pack
Disconnect the AC power adaptor from the DC IN jack on your eaIneorcter.
12
Advertisement
Table of Contents
