7.3 Mounting the outdoor unit
7.3.1 About mounting the outdoor unit
7.3.2 Precautions when mounting the outdoor unit
7.3.3 To provide the installation structure
RZAG71~140N
Sky Air Alpha-series
4P695307-1A – 2024.02
2
1×
Typical workflow
Mounting the outdoor unit typically consists of the following stages:
1
Providing the installation structure.
2
Installing the outdoor unit.
3
Providing drainage.
4
Preventing the unit from falling over.
INFORMATION
Also read the precautions and requirements in the following chapters:
▪
General safety precautions
▪
Preparation
Check the strength and level of the installation ground so that the unit will not
cause any operating vibration or noise.
Fix the unit securely by means of foundation bolts in accordance with the
foundation drawing.
Prepare 4 sets of anchor bolts, nuts and washers (field supply) as follows:
3
PH2
8 mm
7
Installation
|
Installer reference guide
35