7
|
Installation
7.3.4 To install the outdoor unit
7.3.5 To provide drainage
Installer reference guide
36
(mm)
a Make sure not to cover the drain holes of the bottom plate of the unit.
INFORMATION
The recommended height of the upper protruding part of the bolts is 20 mm.
NOTICE
Fix the outdoor unit to the foundation bolts using nuts with resin washers (a). If the
coating on the fastening area is stripped off, the metal can rust easily.
a
▪
Make sure that condensation water can be evacuated properly.
4× M12
a
4× M12
RZAG71~140N
Sky Air Alpha-series
4P695307-1A – 2024.02