7
|
Installation
7.4.8 To connect the refrigerant piping to the outdoor unit
Installer reference guide
44
▪
Piping length. Keep field piping as short as possible.
▪
Piping protection. Protect the field piping against physical damage.
1 Do the following:
▪ Remove the service cover (a) with screw (b).
▪ Remove the piping intake plate (c) with screws (d).
b
d
2 Choose a piping route (a, b, c or d).
a
d
a Front
b Side
c Rear
d Bottom
INFORMATION
a
b
▪
Remove the knockout hole (a) in the bottom plate or cover plate by tapping on
the attachment points with a flat head screwdriver and a hammer.
▪
Optionally, cut out the slits (b) with a metal saw.
a
c
d
c
b
b
b
a
b
4P695307-1A – 2024.02
RZAG71~140N
Sky Air Alpha-series