Disposal; Technical Specifications; Warranty / Service - Beurer LB 88 Instructions For Use Manual

Problem Cause
Strange noise. The water tank
is not positioned
correctly on the
base unit.
There is too little
water in the water
tank.
The device is
not level and
unstable.
Mist escapes The water tank
from underneath is not positioned
the water tank. correctly on the
base unit.

11. DISPOSAL

For environmental reasons, do not dispose of the
device in the household waste at the end of its
useful life. Dispose of the unit at a suitable local
collection or recycling point. Dispose of the device
in accordance with EC Directive – WEEE (Waste
Electrical and Electronic Equipment). If you have
any questions, please contact the local authorities
responsible for waste disposal.

12. TECHNICAL SPECIFICATIONS

Dimensions (L x W x H)
Cable length
Weight when empty
Mains voltage/frequency
Nominal power
Room size
Maximum capacity
Evaporation output

13. WARRANTY / SERVICE

Further information on the warranty and warranty conditions
can be found in the warranty leaflet supplied.
Solution
Lift up the water
tank and position
it correctly on the
base unit.
The tank should sit
tightly on the base
unit.
Fill the water tank.
Place the device on
a firm, level surface.
Lift up the water
tank.
Check whether the
join between the
base unit and water
tank is clean.
Clean if required.
Position the water
tank correctly on
the base unit.
The tank should sit
tightly on the base
unit.
Approx. 19.2 cm x 28.8 cm x
28.6 cm
Approx. 1.4 m
Approx. 2.24 kg
220-240 V AC / 50/60 Hz
280 W
Up to 48 m2
Approx. 6 litres
550 ml/hour
18