■ Dualwatch operation
The Dualwatch function simultaneously monitors 2
frequencies. The IC-R15 has 2 independent receiver
circuits, A and B bands. You can set different frequencies
or receive modes in each band.
L When the Dualwatch function is ON, the audio output
may be interrupted when the frequency is switched while
scanning, or by other factors. (p. vii)
L The FM Radio mode can be selected only for the A band.
D Turning Dualwatch ON or OFF
Hold down D-pad() for 1 second to turn the Dualwatch
function ON or OFF.
• When the Dualwatch function is ON, the display shows the
A band in the upper half and the B band in the lower half of
the display.
or
is displayed on the MAIN band, where you
L
can change the settings.
L The SUB band can be automatically muted.
([MENU] > SET > Sounds > Sub Band Mute)
When you select, "Mute" or "Mute & Beep,"
displayed.
• When the Dualwatch function is OFF, the display shows only
the MAIN band. Push
D MAIN band selection
Push D-pad() to alternately set the A or B bands as the
MAIN band.
•
or
is displayed on the MAIN band, where you can
change the settings.
L Band selection, receive frequency setting, receive mode
selection, Memory channel selection, and the Memory
Write operation can be made only on the MAIN band.
D-pad()
to select the other band.
BASIC OPERATION
A band
B band
Dual band display
(The Dualwatch function is
Single band display
is
(The Dualwatch function is
B band is set as the
MAIN band.
3
1
2
3
4
5
6
7
8
ON)
9
10
11
12
13
14
OFF)
15
16
17
18
13