Ir Board - HP Envy x360 Maintenance And Service Manual

6. From the bottom, push up on the touchpad to remove it from the computer.
To install the touchpad, reverse this procedure.

IR board

To remove the IR board, use this procedure and illustration.
Table 5-8 IR board description and part number
Description
IR board
IR board cable
Before removing the IR board, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the IR board:
1. Remove the tape (1) from the connector on the IR board.
2. Disconnect the cable from the ZIF connector (2) on the board.
3. Remove the Phillips M2.0 × 3.0 screw (3) from the board .
Preparation for disassembly on page
Bottom cover on page 30).
Spare part number
N86631-001
N86636-001
Battery on page 31).
30).
IR board 41