Table of Contents
Advertisement
Appendix A. NetVanta 1760 MIBs
Table 7. ASE SNMP Troubleshooting Commands (Continued)
Command
show snmp user <name> <engine id>
show snmp view <mib name> <mib
oid>
g
NOTE
The output of all show commands can be limited by appending the following modifiers to the end
of the command: | begin <text>, | exclude <text>, and | include <text>. The include modifier
limits output to lines that contain the specified text, the exclude modifier excludes any lines with
the specified text, and the begin modifier displays the first line of output with the specified text
and all lines thereafter.
Refer to the
ASE Command Reference Guide
detailed information on the SNMP troubleshooting commands listed in
9. Appendix A. NetVanta 1760 MIBs
Table 1. ACCESS-MANAGEMENT-MIB
MIB Object Identifier
1.3
1.3.6
1.3.6.1
1.3.6.1.1
1.3.6.1.2
1.3.6.1.2.1
1.3.6.1.2.1.2
Table 2. SYSTEM-MIB
MIB Object Identifier
1.3.6.1.2.1.1
1.3.6.1.2.1.1.1
1.3.6.1.2.1.1.2
1.3.6.1.2.1.1.3
26
Explanation
Displays the SNMP user configurations. <name>
Optional. Specifies the SNMP user to view. <engine id>
Optional. Specifies the SNMP engine ID for the system.
Displays the current MIB configuration for SNMP config-
urations. <mib name> Optional. Specifies a MIB configu-
ration to display. <mib oid> Optional. Specifies the OID
for the MIB.
available online at
https://supportcommunity.adtran.com
MIB Object Name
org
dod
internet
directory
mgmt
mib-2
interfaces
MIB Object Name
system
sysDescr
sysObjectID
sysUpTime
SNMP in the NetVanta 1760
Table
7.
6AMCCG0019-29A
for
Advertisement
Table of Contents
