Menu Functions - YASKAWA Solectria PVI-36TL-480-V2 Installation And Operation Manual

Installation and Operation Guide SOLECTRIA® PVI 25TL-208, PVI 36TL-480-V2, PVI 50TL-480 and PVI 60TL-480
 If the inverter fails to operate normally, the "FAULT" light will illuminate and the fault menu will be
displayed. Select Current Error and press ENT to access the current faults the inverter has recorded. This
information will show on the LCD screen as shown in the Figure 6-6.

7. Menu Functions

LCD displays "Main user interface" when the inverter is in operation mode. Press ESC in this interface to escape
the default interface and to enter the main operation interface. The main operation interface is shown in Figure
7-1.
The main operation interface of LCD screen has 5 menus, i.e.
H R , and D
ISTORY ECORD
confirm selection. The users can return to the default indication interface by pressing ESC key.
M
EASUREMENT
When the cursor moves to
information as shown in Figure 7-2 . Check the information by pressing UP and DOWN. Return to the previous
menu by pressing ESC.
DOCR-071086-C (04/12/2024)
Current Error
Date Time
2015/10/22 12:20:08
2015/10/22 12:20:08
2015/10/22 12:20:08
2015/10/22 12:20:08
2015/10/22 12:20:08
Figure 6-6 Fault Information Interface
Main Menu
Figure 7-1 Main Menus on the LCD
I . The users may select options with
EVICE NFORMATION
D
ATA
M
EASUREMENT DATA
Fault
ArcboardErr
Fault0040
Fault0040
Fault0040
Fault0040
Measurement Data Setting
Power On/Off
History Record
Device Information
M
EASUREMENT
in the main screen, you should press ENT to select the operation
P1/1
D S P
, ,
ATA ETTINGS OWER
and
, and then press ENT to
ON/OFF,
Page 72 of 136