Step
Screw (quantity)
1
M2 × 2.5 mm, flat-head, nylon-coated (2)
Step 2.
Install the power button with or without fingerprint reader in reverse order.
LCD unit
Follow the instructions to replace the LCD unit.
Note: If you replace the system board of ThinkPad L13 2-in-1 Gen 5, remember to make the sensor
calibration. For details, see "Sensor calibration" on page 56.
For access, remove these FRUs in order:
• "ThinkPad Pen Pro (for ThinkPad L13 2-in-1 Gen 5 only)" on page 62
• "Base cover assembly" on page 63
Step 1.
Remove the LCD unit as shown below.
Color
Torque
Black
0.181 Nm
(1.85 kgf-cm)
.
Chapter 8
Removing or replacing a FRU
91