Table of Contents
Advertisement
Step 2.
Install the LCD bezel in reverse order. When installing, ensure that all the latches are attached
firmly.
Note: After the LCD bezel sheet is removed
required for replacement.
LCD hinges
Follow the instructions to replace the LCD hinges.
For access, remove these FRUs in order:
• "Base cover assembly" on page 63
• "LCD unit" on page 91
• "LCD bezel" on page 94
Step 1.
Remove the LCD hinges as shown below.
Table 10. Screw specification
Step
Screw (quantity)
1
M2.5 × 2.5 mm, flat-head, nylon-coated (6)
Step 2.
Install the LCD hinges in reverse order.
LCD cable
Follow the instructions to replace the LCD cable.
1
, it cannot be used anymore. A new LCD bezel sheet is
Color
Torque
Silver
0.294 Nm
(3.0 kgf-cm)
.
Chapter 8
Removing or replacing a FRU
95
Advertisement
Table of Contents
