I/O connectors brackets
Follow the instructions to replace the I/O connectors brackets.
For access, remove these FRUs in order:
• "ThinkPad Pen Pro (for ThinkPad L13 2-in-1 Gen 5 only)" on page 62
• "Base cover assembly" on page 63
Step 1.
Remove the I/O connectors brackets as shown below.
Step
Screw (quantity)
1
M 2.5 x 4.5 mm, wafer-head, nylon-coated (2)
2
M 2 x 4 mm, wafer-head, nylon-coated (4)
Step 2.
Install the I/O connectors brackets in reverse order.
When installing: Plug the gray cable into the main connector, and the black cable into the auxiliary
connector on the card.
Fingerprint reader cable (for selected models)
Follow the instructions to replace the fingerprint reader cable.
Color
Torque
Silver
0.294 Nm
(3.0 kgf-cm)
Black
0.181 Nm
(1.85 kgf-cm)
.
Chapter 8
Removing or replacing a FRU
73