Sensor Board; Lcd Cover Assembly - Lenovo ThinkPad L13 2-in-1 Gen 5 Hardware Maintenance Manual

Step 2. Install the microphone rubber and camera-and-microphone module in reverse order.

Sensor board

Follow the instructions to replace the sensor board.
For access, remove these FRUs in order:
• "Base cover assembly" on page 63
• "LCD unit" on page 91
• "LCD bezel" on page 94
• "LCD panel" on page 93
Step 1. Remove the sensor board as shown below.
Step 2. Install the sensor board in reverse order.

LCD cover assembly

For access, remove these FRUs in order:
• "Base cover assembly" on page 63
• "LCD unit" on page 91
• "LCD bezel" on page 94
• "LCD panel" on page 93
• "LCD hinges" on page 101
• "LCD cable" on page 95
• "Webcam privacy shutter" on page 96
• "Camera-and-microphone cable and sensor board cable" on page 96
• "Microphone rubber and camera-and-microphone module" on page 97
• "Sensor board" on page 98
98
ThinkPad L13 Gen 5,ThinkPad L13 2-in-1 Gen 5 and ThinkPad S2 Gen 9 Hardware Maintenance Manual