Table of Contents
Advertisement
– ThinkPad L13 2-in-1 Gen 5
Keyboard bezel assembly:
B
install the CU foil
How to configure keyboard language in UEFI BIOS
Follow the instructions to configure keyboard language in UEFI BIOS.
Step 1.
Enter the UEFI BIOS menu.
Step 2.
Clean all thermal grease that has been used and then apply new thermal grease if needed.
Step 3.
Click Config ➙ Keyboard/Mouse ➙ Keyboard Layout, and then select the keyboard language.
World facing camera and camera cable
Follow the instructions to replace the world facing camera and camera cable
For access, remove these FRUs in order:
• "ThinkPad Pen Pro (for ThinkPad L13 2-in-1 Gen 5 only)" on page 62
• "Base cover assembly" on page 63
• "Built-in battery" on page 65
• "Keyboard" on page 66
• "M.2 solid-state drive" on page 68
• "Wireless WAN card (for selected models)" on page 70
• "Thermal fan and heatsink assembly" on page 71
• "I/O connectors brackets" on page 73
• "Fingerprint reader cable (for selected models)" on page 73
• "System board" on page 82
Step 1.
Remove the world facing camera and camera cable as shown below.
System board:
A
install Al foil
.
Chapter 8
Removing or replacing a FRU
89
Advertisement
Table of Contents
