Connecting The Charger To The Moneris Go Slim - Moneris Go Slim Integrated Getting Started Manual

Label Hardware Element
16
Power Key
17 Scan Key
Base Charging
18
Interface
19 Lanyard Hole

Connecting the charger to the Moneris Go Slim

Moneris Go Slim Integrated: Getting Started Guide
Function
Turns the terminal on and off.
Red laser beam will emit to scans QR codes on a receipt to help you find
a transaction to refund, void, or reprint receipts.
Connects the terminal with the optional charging base.
Used to attach a strap or loop to the terminal.
1. Locate the USB Type-A to USB Type-C charge wire.
2. Plug the Type-C connector into the left side of the Moneris Go
Slim terminal. (the small end)
3. Plug the USB connector to the USB power source.
(Alternatively, use the AC adaptor to connect into a working
electrical outlet)
9