Enabling Wi-Fi; Password Rules - Moneris Go Slim Integrated Getting Started Manual

Table of Contents

Advertisement

Enabling Wi-Fi

This section explains how to enable Wi-Fi communication on the Moneris Go Slim as part of the software
configuration. It follows on from the communication settings in step 7. When you tap Wi-Fi in the
communication settings, the Android settings appear for Wi-Fi. You can now enable Wi-Fi and set up static IP if
needed.
1. Swipe down from the top of the screen to display the Android quick settings menu.
2. Tap the Wi-Fi toggle to turn it on.
3. Long press the Wi-Fi toggle to open the Android Wi-Fi settings. The device displays a list of available Wi-Fi
networks.
4. Tap the Wi-Fi network you want to connect to.
Note:
Tap Forget to deselect the current Wi-Fi network, then select the correct Wi-Fi network.
5. Enter the password.
6. To configure static IP, follow these steps. Otherwise, skip to step 7.
a. Scroll down to IP settings.
b. Tap DHCP and select Static IP from the menu.
c. Enter the static IP, gateway IP address, DNS IP address and any other required settings.
7. Tap Connect.

Password rules

Follow these password rules to maintain the security of your device. Passwords that violate any of these rules
will not be accepted by the Moneris application.
Length
Composition
Repeating characters
Avoid common
sequences
Moneris Go Slim Integrated: Getting Started Guide
8 to 16 characters
At least 1 number, 1 alpha character, and 1 non-alphanumeric character
No more than two repeating characters. For example, 22 is acceptable but 222 is not.
Avoid sequences like 123 or abc that are easy to guess. For example, 12 is acceptable
but 123 is not. Ab is acceptable but abc is not.
19

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Go Slim Integrated and is the answer not in the manual?

Table of Contents