Ir Connector(Cn10)(Optional); Power Connectors (Cn20, Cn21,Cn23); Ebx Power Connector, +5 V, +/-12 V (Cn20); Power Supply Connector, -5V, -12V (Cn21) - Advantech POD-6552 User Manual

5.25 intel celeron m sbc, with cpu/ vga/lcd, and ethernet interface

Hide thumbs Also See for POD-6552:

Table of Contents

2.25 IR Connector(CN10)(Optional)

This connector supports the optional wireless infrared transmitting and

receiving module. This module mounts on the system case. You must

configure th setting through BIOS setup. Detailed pin definition you will

find in Appendix A.

Important

Supplies main power to the POD-6552 (+5 V), and to devices that require

+12 V. The POD-6552 supports AT power via CN20.

Supplies secondary power to devices that require -5 V and -12 V.

The POD-6552 supports ATX power via CN23 and CN20. CN23 supplies

main power (5VSB), and it is a 3 x 1 power connector, w/Fixed Lock

4200-WS-A1.

Important

POD-6552 User's Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Make sure that J1 DO NOT equipped with any

jumper when you use IR connector. J2, J3 and

J4 would help to set COM2 RS232/422/485.

Make sure that the ATX power supply can take

at least a 10 mA load on the 5 V standby lead

(5VSB). If not, you may have difficulty power-

ing on your system.

Table of Contents